Swimava Starter Set Infant Neck Ring Tube (Pink Berry, 3-18m toddlers)

Close

Description

Before your baby can walk or even crawl, they can be Swimava Active in water!

Swimava Starter Ring + Pool can help your infant with foundations of swimming while encouraging early learning and development from early as 3 months old.

As new parents it may not be easy to frequent public pools with your infant.

Swimava Starter allows your infant to realise the benefits of learning to swim from home.

One of the first steps to water safety is learning to tread water.

Swimava allows for free movement of arms and legs so your infant can develop this ‘treading movement’ early and naturally.

We have more than 700,000 happy Swimava Baby customers globally!

Supplement Facts

Size Chart

inner circumference: 29 cm

inner diameter: 9 cm

 

Suitable ages 3-18 months.

Min. weight 5.5kg (12lbs) Max. weight 13kg (29lbs)

Ingredients

Directions

Our Swimava Guide Must Be Read in Full Prior to Use (See Below)

Never leave your infant unattended when using the Swimava Bath and Swim Ring.
Always remain within arm’s reach of your infant.
Product Life of your new Swimava is 17 months following date of purchase. For safety reasons, do not use your Swimava after the 17 month product life has expired and dispose of safely.                   Why Swimava? Our unique products encourage physical activity potentially leading to early development of higher functions and improved sleeping patterns. Our Grade 1 Starter Ring is suitable for infants 3-18 months and weighing 5.5kg (12lbs) – 11kg (25lbs).

Now get started with Safely Swimava!

 

1. Inflate the Swimava Baby Ring and/or Bath

  • Separate hand pumps are included for each Swimava Baby Ring and Swimava Bath. To inflate the Baby Ring insert the pump nozzle firmly into the top air chamber safety valve to break the factory seal. Be careful not to damage the air valve.
  • Pump up the top chamber until it is full and feels firm. Then repeat steps with the bottom chamber. If the seams begin to show strain stop inflation and release air to reduce pressure until all signs of stress on seams are gone.
  • Ensure each valve is securely plugged after being filled. Periodically check the valves to ensure they are plugged.

 

  • Do not over inflate the ring.
  • Prior to placing the Baby Ring on your infant put the ring completely under water for 60 seconds and check for any air bubbles indicating leakage.
  • The small hand pump is not a toy, keep it out of reach of children.

 

2. Place the Swimava Baby Ring on your Infant

  • Caregiver #1 should support the infant’s head while Caregiver #2 fastens the Baby Ring. Open the Baby Ring and gently bring it around the infant’s neck from the front or from behind. The baby handles should be on the bottom and facing down.
  • Close the Baby Ring securing both the top and bottom buckles. Gently lift the infant’s chin before fastening. For Baby Rings without a specially designed chin rest, the buckle section is the next best place to use.
  • Always adjust the Baby Ring diameter to suit your infant prior to placing him in the pool or bath, (never when already in the water).
  • You should always be able to slide at least 2 fingers in between the Baby Ring and your infant all the way around.
  • You can slightly decrease the lower/inner air chamber pressure to relax the inner ring diameter if the ring feels too tight.
  • The upper air chamber should always be fully inflated.
  • The Baby Ring should move freely around the infant’s neck and should only be supporting his head above the water.

 

3. Test the Water Temperature and Adjust the Water Level

  • Fill the Swimava Bath or your bath tub with warm water.
  • Adjust the water level so your infant can float and enjoy free movement of his arms and legs.
  • The water temperature should be approximately 35 degrees Celsius (95 degrees Fahrenheit) with no more than +/- 2 degrees Celsius (+/- 3.6 degrees Fahrenheit) variation. Monitor the water temperature with a floating baby thermometer.

 

4. Place your Infant in the Water

  • Support your infant from under the arms while gently placing him in the bath or pool.
  • Never leave an infant unattended while using this Swimava Baby Ring or any flotation product. Always remain within arm’s reach.
  • Remember: Maximum infant weight should not exceed 11kg (25lbs).
  • Never use the handles on the Baby Ring to lift your infant in or out of the water.
  • Do not use bath oils in the water as these can affect the durability of the plastic PVC Swimava Baby Ring. This could also make surfaces unexpectedly slippery and lead to an accident when removing your infant from the bath.
  • Pay close attention to your infant for signs he is ready to finish bath/swim time. Your infant most certainly will let you know when he has had enough!
  • Although it may be possible for your infant to enjoy the Swimava Baby Ring for over 20 minutes, this should not be exceeded.

5. Take your Infant out of the Water

  • Two caregivers should always be present when taking your infant out of the water.
  • Caregiver # 1 should hold the infant firmly under the arms prior to Caregiver #2 removing the Swimava Baby Ring.

Expire Date

This product has no expiration date or the manufacturer has not provided an expiration date.